Evaluation of Matrix9 silicon photomultiplier array for small-animal PET

Junwei Du, Jeffrey P. Schmall, Yongfeng Yang, Kun Di, Emilie Roncali, Gregory Mitchell, Steve Buckley, Carl Jackson, Simon R Cherry

Research output: Contribution to journalArticlepeer-review

18 Scopus citations


Purpose: The MatrixSL-9-30035-OEM (Matrix9) from SensL is a large-area silicon photomultiplier (SiPM) photodetector module consisting of a 3?3 array of 4?4 element SiPM arrays (total of 144 SiPM pixels) and incorporates SensLs front-end electronics board and coincidence board. Each SiPM pixel measures 3.16?3.16 mm2 and the total size of the detector head is 47.8?46.3 mm2. Using 8?8 polished LSO/LYSO arrays (pitch 1.5 mm) the performance of this detector system (SiPM array and readout electronics) was evaluated with a view for its eventual use in small-animal positron emission tomography (PET). Methods: Measurements of noise, signal, signal-to-noise ratio, energy resolution, flood histogram quality, timing resolution, and array trigger error were obtained at different bias voltages (28.032.5 V in 0.5 V intervals) and at different temperatures (5 ?C25 ?C in 5 ?C degree steps) to find the optimal operating conditions. Results: The best measured signal-to-noise ratio and flood histogram quality for 511 keV gamma photons were obtained at a bias voltage of 30.0 V and a temperature of 5 ?C. The energy resolution and timing resolution under these conditions were 14.2% ± 0.1% and 4.2 ± 0.1 ns, respectively. The flood histograms show that all the crystals in the 1.5 mm pitch LSO array can be clearly identified and that smaller crystal pitches can also be resolved. Flood histogram quality was also calculated using different center of gravity based positioning algorithms. Improved and more robust results were achieved using the local 9 pixels for positioning along with an energy offset calibration. To evaluate the front-end detector readout, and multiplexing efficiency, an array trigger error metric is introduced and measured at different lower energy thresholds. Using a lower energy threshold greater than 150 keV effectively eliminates any mispositioning between SiPM arrays. Conclusions: In summary, the Matrix9 detector system can resolve high-resolution scintillator arrays common in small-animal PET with adequate energy resolution and timing resolution over a large detector area. The modular design of the Matrix9 detector allows it to be used as a building block for simple, low channel-count, yet high performance, small animal PET or PET/MRI systems.

Original languageEnglish (US)
Pages (from-to)585-599
Number of pages15
JournalMedical Physics
Issue number2
StatePublished - Feb 1 2015


  • instrumentation
  • Matrix9
  • nuclear imaging
  • PET
  • silicon photomultiplier

ASJC Scopus subject areas

  • Biophysics
  • Radiology Nuclear Medicine and imaging


Dive into the research topics of 'Evaluation of Matrix9 silicon photomultiplier array for small-animal PET'. Together they form a unique fingerprint.

Cite this